Convector vs Radiator with differences

When looking for an efficient way to heat your home, you may have heard of convectors. But how do they work? And what is the difference between a conventional radiator and a convection heater? There are a lot of heating equipment on the market today. And it should be noted that radiators and convectors are still the most popular. Do you want to invest in one of these devices, but do not know which one to choose? In this article we explain all the differences between a convector and a radiator. Convector vs Radiator with differences

The biggest difference: how they work  Convector vs Radiator with differences

Convector operation:  Convector vs Radiator with differences

As its name suggests, a convector uses convection heat to heat the room in which it is installed. By means of a vacuum, it draws cold air from below to create a circulation of warm air. This heating system also uses hot water to function efficiently. In fact, the hot water circulates in a very thin tube covered with aluminum slats that is placed under the unit. It is these sheets that increase the contact surface with the air and act as a conductor of heat throughout the device.

Radiator operation

The radiator also uses hot water in its operation. The latter circulates in panels, cast iron, steel, aluminum or in tubes to simplify the operation of the heating equipment. The hot water circulating through these tubes leads to heating of the surrounding air. As a result, the heated air that is diffused into the room where a radiator is installed is a fusion of convection and radiant heat.

Other differences between radiator and convector

Apart from its operation, there are other points of difference between a convector and a radiator. A radiator takes a little time to heat up a room. While a convector, on the other hand, heats up quickly. That is, the convector heats up much faster than a radiator.

For the size of the equipment, a convector can be presented in a reduced size if you want to give more aesthetics to the decoration of your house. Ideally, a radiator should have a large surface area for optimal heat transfer. On the decorative side, a radiator is clearly visible in a room, but it can also act as a towel rail. The convector must be discreetly integrated into the interior of your house.

In the past, a convection heater was considered the most energy efficient option for heating. But today, there are also very efficient and inexpensive radiators.

Leave a Reply

Your email address will not be published.

Back to top button